Every wonder about painting tile floors?
I’ve painted a lot of things, but I haven’t attempted painting tile floors…until now! Our laundry room also serves as my crafting/DIY room, so it sees a lot of wear and tear (and lots and lots of paint). There was already paint everywhere, so I figured adding a little more paint wouldn’t be a big deal…
To paint tile floors, here is what you’ll need:
- Acetone (or another heavy-duty cleaner)
- Wire Brush
- Razor Blade
- Simple Green
- Electric Sander
- Floor Paint (BEHR Low-Lustre Enamel Porch & Patio Floor Paint in Ultra Pure White and Slate Gray)
- Painter’s Tape
- Paint Brush
- Foam Roller
- Paint Tray
To begin, sweep floors with a vacuum.
Next, use a razor and remove larger spots (I had paint spills and gunk everywhere).
Use acetone and a wire brush to clean the tiles.
After cleaning, sand the floors to remove as much gloss as possible.
I’m not a patient person, so I hope I don’t regret not spending more time on this… After sanding, vacuum again and clean the tile with Simple Green and a rag.
Tape off all the baseboards.
Prime the entire floor using a roller and paintbrush for the hard-to-reach areas. Once the primer is completely dry, paint the floor with two coats of BEHR’s Porch and Patio Floor Paint.
After that is dry, you can begin the (optional) stenciling. Let me warn you, this will take FOREVER and lots (and lots) of patience.
I used the Rabat 12 inch tile stencil from Royal Design Studio and have 12 inch tiles, so my stencil was square-by-square.
You need to find a rhythm with stenciling. Plan how to work around wet areas and remember which tiles are wet so you don’t step in them (which I did several times)
I would do several stencils and take a break to let them dry. Make sure to cover the paint and roller so they don’t dry out.
Slowly the pattern began to come together.
Rather than deal with taking the washer and dryer out, we elevated them so I could paint several inched under them.
I finished with several coats of polycrylic (applying with a foam roller).
And my floor was complete!
I used BEHR MARQUEE paint for the laundry room walls and doors. It’s amazing paint because it has a one-coat hide guarantee, and it is very durable.
I used Orion Gray for the doors and Cameo White for the walls.
I’ll keep you posted on how the painted tile floors hold up!
*UPDATED* The floors didn’t hold up very well and scratched fairly easily. The pattern helped disguise scratches, but we did ultimately remove the tile and replace it with luxury wood-looking vinyl flooring.
Go create something!
Are you new to my blog? Go HERE to see my home tour and HERE to shop for items I use in our home. *This post is a sponsored post by BEHR paint and Royal Design Studio. I take pride in reviewing only products that fit my brand and will be beneficial to my readers. And while this post is sponsored, all the opinions are my own.